[Geeza33]

Re: Hotpoint LS12-EVO3 Flashing Lights

Ok, thanks for your help.

The dishwasher is only three years old!!!

Have had a quick look the PCB is about 70 quid.

Is the PCB mounted in the door?

[Geeza33]

Re: Hotpoint LS12-EVO3 Flashing Lights

Hi,

I have taken out the dishwasher & tipped onto it’s side.

Whilst out, I took off the base & this was bone dry.

Checked the pump wasn’t blocked.

Checked the heater, this was 25 ohms, so ok. As read on the forum that this might be the problem.

Ran a rinse cycle and rinse led flashed at the end.

Ran a wash cycle & “ECO” light was flashing at the end.

Any other ideas?

Regards

G

[Geeza33]

Re: Hotpoint LS12-EVO3 Flashing Lights

Thanks for that.

I will give that a try.

[Geeza33]

Re: Hotpoint LS12-EVO3 Flashing Lights

Juhad another check on the top of the door it says BFI620.

On the name plate it says model LS12-EV03.

[Author]

Posts