Forum Replies Created
-
AuthorPosts
-
gegsy
ParticipantRe: SAMSUNG ?????
Hi Jim
The correct model is B1245S.
The SE is actually 5E and means that there is a drain error.HTH
Greg
Check your email 😉
gegsy
ParticipantRe: On reflection,
:help: :snigger:
January 3, 2007 at 9:04 pm in reply to: BOSCH WFG2220/ 2020- Control panel dead. Advice needed #199296gegsy
ParticipantRe: BOSCH WFG2220/ 2020- Control panel dead. Advice needed
peeppeep94 wrote:you mean just plug something else into the electric socket that the washing maching is using? If so i plugged an electric fan in it works fine.
Also when the machine is plugged in there are lights on.Thats what I meant, however you have lost me now because you said fault was dead, but now there are lights on 😕
I did all the checks i thought i could and this is the best way i can desctibe the state of the machine:
nothing blocking in the trap
propellar thing leading to trap moves with varying resistance.
drum spins – with a bit of resistance ~(same as before)
when try to start normal cycle lights come on, machine fills (and appears to heat water too) , then when would expect drum to start turning just hear click click noises.I would check the carbon brushes in the motor in that case for starters 😀
With appliance un-plugged of course :plug:
Greggegsy
ParticipantRe: Bosch to/from China
Turbo wrote:Its the change in the transit bolts that bother me Goatboy as I wonder if they have put in a cheap and nasty bearing set up that wont last.
I wouldn’t think so, a Bosch part is a Bosch part, its only the assembling location that has changed.
Greg
gegsy
ParticipantRe: On reflection,
Whats this… a Scottish uprise 😆
Greg
January 3, 2007 at 7:00 pm in reply to: BOSCH WFG2220/ 2020- Control panel dead. Advice needed #199294gegsy
ParticipantRe: BOSCH WFG2220/ 2020- Control panel dead. Advice needed
Hi
Before jumping the gun, has the socket been checked with another product, say a lamp, just to see if you are getting a feed.
Have you checked the fuse in the plug? (13Amp)
The module part is app £110 +VAT 😕 and providing the drum bearings are sound and the motor is ok, IMHO it worth repairing as this machine is quite a better build than some of the newer models and is more substantial.
Module is available from spares@ukwhitegoods.co.uk p/no 268543 if so required, but can be tricky to fit.
Have you tried looking for an engineer from the link below also,as they most of them are quite knowledgable on the Bosch appliances 😀Greg
gegsy
ParticipantRe: Bosch Spider
Hi Phil
AFAIR it comes with fixing kit, but to be safe I would order the kit, app £12+VAT 059132HTH
Greggegsy
Participantkwatt wrote:I could start a fight in an empty house I could. 😉
Now that I believe 😆
Greg
gegsy
ParticipantRe: On reflection,
Oi you, I will have you know I have done a bit today 😆 8)
Greg
gegsy
ParticipantRe: Bosch Fridge/Freezer problem
Hi
Im sure 24 hours is sufficient for a defrost on this domestic appliance.
Also, If you are an engineer in the trade, then you will need to gain access from site admin 😉Greg
gegsy
ParticipantRe: On reflection,
iadom wrote:I thought my suggestion that happycacks brother in law from Sydney was sneaking in and stuffing a can of Fosters up the waste pipe was quite funny at the time. 😛 🙂
Well I laughed 😀 shame it couldn’t stay posted.
Greg
gegsy
ParticipantRe: Bosch Washer/Dryer
Hi
Have a look around the door inner or failing that have a look on the back of the appliance at the top near the power cable entry.Greg
gegsy
ParticipantRe: On reflection,
Penguin45 wrote:Good new year, you guys? All resolutions being adhered to?
Not yet 😉
Greg
gegsy
ParticipantRe: Tesco, every little helps!
maltheviking wrote: Mind you it would be interesting to know how Tesco’s installer would have handled it, I don’t think £70 would cover the final bill :rolls:
I would imagine that the £70 would be to install to original wiring etc. Hopefully they have that clause in there or it could prove to be an expensive lesson for them 🙂
Greg
gegsy
ParticipantRe: On reflection,
iadom wrote:……….my ever so slightly sarcastic post. 😳 😆
Doesn’t sound like the Jim I know 😆
Happy New Year to all BTW 😀
Greg
-
AuthorPosts
