Forum Replies Created
-
AuthorPosts
-
gegsy
ParticipantRe: Stoves 600GTF gas cooker cooling fan
Hi Rick
Sounds similar machine. Looks like you sussed fault 😉 but PCB is defo one to watch 😀Greg
gegsy
ParticipantRe: LG GRL227SSJA F/F
Hi Bob
Thanks for email will have a good look at it.
CheersGreg
November 15, 2006 at 8:26 am in reply to: Leisure Rangemaster 55 – Gas Cooker Not Getting Hot #195280gegsy
ParticipantRe: Leisure Rangemaster 55 – Gas Cooker Not Getting Hot
Martin wrote:My guess is that Rangemaster have their own team of CORGI approved repairers you can call on for assistance! 😉
Depends, we get work from a couple of work providers aswell as direct private calls 😉 Although Rangemaster now are owned by AGA 😀
Greg
November 15, 2006 at 1:15 am in reply to: Leisure Rangemaster 55 – Gas Cooker Not Getting Hot #195278gegsy
ParticipantRe: Leisure Rangemaster 55 – Gas Cooker Not Getting Hot
Hi
I am a gas engineer 🙂 It can be thermostat,blocked/clogged oven burner or most commonly the FSD unit. Relatively easy jobs on these appliances, well I love em 😉As Mr P has stated, best to leave to a Corgi engineer. Always check the Corgi card of the gas engineer that you use. If they cannot provide the card or say they don’t carry it, then I would become suspicious and refuse to use them. You can always call Corgi to confirm but not 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} without photo authentication.
Always check the rear of their card for what they are qualified in working on as most people assume that Corgi means they can work on any gas appliance… WRONG ❗Regards
Greggegsy
ParticipantRe: Controlled Mayhem
Hi
I’m sorry I won’t be there 😥 . Told Kevin a while back. Thanks for the invite though, the gesture was very kind.
Would be unfare with five kids so near to Christmas the money spent quaffing would be unjust.Thanks again and hope you all have a good time :tup:
Greg
gegsy
ParticipantRe: Stoves 600GTF gas cooker cooling fan
Hi Rick
Im just wondering if this oven is similar to a Diplomat oven??
Ive had two of these that look like fan failures but turned out to be cooling fan pcb faults (from the back, l/h side)
To describe the oven, is the cooling fan square similar to a PC cooling fan?
If so it may be one of the same ovens.Greg
gegsy
ParticipantRe: Is this Legal?
I agree wouldn’t be much left to prove, but we had a building locally go boom due to person installing own cooker with faulty self ignition that had filled the room with gas until the self ignition finally decided to operate. He got no pay out I know that for a fact 😕
Greg
gegsy
ParticipantRe: Is this Legal?
Pat-UK wrote:Yep , DIY Gas installation and service work is perfectly legal,
Thats an absolute disgrace, although I bet they don’t realise that their house insurance is void should it go tits up BOOM 😀
Greg
gegsy
ParticipantRe: Favourite Kids Sc-Fi
effzedarr wrote:You enjoyed ”Muffin the Mule” Martin 😉 I think thats only legal in Holland & some Eastern European states ,but now were in the EU who knows?
Chris.. 8)In a double boxset was that and Dobbin the Donkey both X cert 😀
Greg
gegsy
ParticipantRe: BSH fixing Gias
Redflame wrote:PS:Have BSH dropped Gorenje & if they have why? 😯 their fridge freezers were GVFM.
Try telling Smeg Retroactive fridge customers that 😆
Greg
gegsy
ParticipantRe: Siemens WM71631/01 no drum action
Hi Baron
F10 is no communication between power module and motor control PCB.Either faulty PCB/s or loom connection fault.
Greg
gegsy
ParticipantRe: Bosch SGS59A22GB Making loud bangs!
Just to add, occassionally the heater ‘O’ rings sealing to sump weep and dribble onto motor and edge connector, where arcing and popping can also be heard.
Greg
gegsy
ParticipantRe: Bosch SGS59A22GB Making loud bangs!
Worth checking the mains supressor, thay have a tendancy to go west.
Power off if investigating please. 😀
Greggegsy
ParticipantRe: On reflection,
shopping trolley tied to train 😆
gegsy
ParticipantRe: Blame the Penguin 😀
gegsy wrote:I wonder if it was this that has set this idiot off
Idiot as in Jeremy not you Chris. What I meant was your reply to him in that forum may have started a server moan onslaught. BTW, Ken are you leaving him dangling as he has replied the little tinker 😀
PS – Qualifications??
Greg -
AuthorPosts
