[gegsy]

Re: Anguis in herba

Oh well all quiet for now, somehow I feel temptation will get the better and he will either return or enter under a pseudonym (try typing that after a few JD’s 😆 )

Greg

[gegsy]

Re: Anguis in herba

They say that genius and insanity are very close to each other, clearly he is the latter 😆

Greg

PS Sorry for cupid stunt paste in trade, it was my final salute to him/them,
I like the bit where he started new thread, “I will finish!”, oh well Im sure his mother loves him 🙄

[gegsy]

Re: Call Yourself An Engineer

The pair of them really were a pair of
‘s 😆

Greg

[gegsy]

Re: Anguis in herba

Get the pair of them t-shirts I reckon 😆

Greg

[gegsy]

Re: Bosch gsu3101GB/01 standalone freezer problem

If it can manage it on fast freeze I would be thinking along the lines of NTC or module.

Only a an enigineer visit can confirm this, you could try the link below.

Greg

[gegsy]

Re: Anguis in herba

Into the fray 😆
And like a fart in a wind tunnel he gone

[gegsy]

Re: Bosch Dishwasher SGS5312GB hangs during wash.

Sounds to me like a PCB module failure as the sensor is used for all washes. To confirm please use engineer link below.

Greg

[gegsy]

Re: Bosch SGS43C12GB/08

Hi Chris
If you have checked the top spray arm for blockages,water level correct and re-circulation pump driving and not blocked, you are probably either looking at a faulty diverter unit which comes complete on the heater unit and/or the pcb.

Greg

[gegsy]

Re: whirlpool/ignis electric single oven

Hi Ally

P/no 481245058265 thats as much as I know sorry 😀

Greg

[gegsy]

Re: Bosch dishwasher SGS4012GB/01 – How to get to water solo

You are very welcome Ian.

Greg

[gegsy]

Re: Anguis in herba

Ho hum 😆 If he surfaces he’s all yours 😉

Greg

[gegsy]

Re: Bosch dishwasher SGS4012GB/01 – How to get to water solo

Those “veins” should turn easliy, with appliance un plugged 🙂
Its either seized or a foreign object has jammed it.
To remove that recirculation pump does require a reasonable amount of strip down and would seriously consider the engineer link below.

Greg

[gegsy]

Re: Bosch dishwasher SGS4012GB/01 – How to get to water solo

Ok Ian
Check that the filters and spray arm jets are free from blockages, reove and clean. Then try again.
How high is the water level when it has finished filling? Hopefully just below the strut of the lower spray arm.

Greg

[gegsy]

Re: New ISE user has arrived !!

……..and a maintanence wash every day 😆

Greg

[gegsy]

Re: Bosch dishwasher SGS4012GB/01 – How to get to water solo

First things first, when you start a prog you get the initial drain sequence after that do you hear a slight humming noise??

Greg

[Author]

Posts