gegsy

Forum Replies Created

Viewing 15 posts - 5,566 through 5,580 (of 6,724 total)
  • Author
    Posts
  • in reply to: Whirlpool US style water dispenser problem #172460
    gegsy
    Participant

    Re: Whirlpool US style water dispenser problem

    If you remove front plinth, and look in the bottom left corner, you will see pipe coming out of door hinge and this should be connected to a push fit connector on the pipe you are talking about.
    Power off first of course :plug:

    Greg

    in reply to: Miele water protection system #172448
    gegsy
    Participant

    Re: Miele water protection system

    There is a solid bottom to this machine below the drum. On it is a float unit, I would imagine water from the hose bein displaced has leaked in there and activated said float.
    You will need to remove this water and thus allow float to return to normal position.
    Always unplug appliance before attempting any repair. :plug:

    Greg

    gegsy
    Participant

    Re: How much do you think a Hoover 3236 washer cost in 70’s?

    andy_art_trigg wrote:Respect 🙂

    Indeed 😉

    Greg

    in reply to: URGENT WARNING #150513
    gegsy
    Participant

    Re: URGENT WARNING

    in reply to: URGENT WARNING #150511
    gegsy
    Participant

    Re: URGENT WARNING

    in reply to: Name this mystery object. #172235
    gegsy
    Participant

    Re: Name this mystery object.

    Could it be insert end of roll of tape or quick wrap? Discarded after depleted.

    Greg

    in reply to: Bosch SHU6800 Disassembly #172252
    gegsy
    Participant

    Re: Bosch SHU6800 Disassembly

    Either side of fascia, there are 2 torx 20 screws going through stainless which also holds it in place.
    Unplug appliance first :plug:

    Greg

    in reply to: Hotpoint Door Seals #172152
    gegsy
    Participant

    Re: Hotpoint Door Seals

    leavemetogetonwithit wrote:I Sometimes I come across seals which seem to be slimy to the touch. Mike.

    Crikey, you will be makin P45 jealous at this rate 😆

    Greg

    in reply to: Bosch SHU6800 Disassembly #172250
    gegsy
    Participant

    Re: Bosch SHU6800 Disassembly

    Are you sure about model number?
    I can find SHU6802UC…..
    The fault code is none existent too, please get correct model on the inner door stainless, usually etched on.

    Greg

    in reply to: Another joke. #137204
    gegsy
    Participant

    Re: Another joke.

    People were in their pews talking at church when suddenly Satan appeared at the front of the church. Everyone started screaming and running for the front entrance, trampling each other in a frantic effort to get away from evil incarnate.
    Soon everyone had exited the church except for one elderly gentleman who sat calmly in his pew without moving, seeming oblivious to the fact that
    God’s ultimate enemy was in his presence.
    So Satan walked up to the old man and said. “Don’t you know who I am?”
    The man replied, “Yep, sure do.”
    “Aren’t you afraid of me?” Satan asked.
    “Nope, sure ain’t.” said the man.
    “Don’t you realize I can kill you with a word?” asked Satan.
    “Don’t doubt it for a minute,” returned the old man in an even tone.
    “Did you know that I could cause you profound horrifying, AGONY for all eternity?” persisted Satan.
    Yep,” was the calm reply.
    “And you’re still not afraid?” asked Satan.
    “Nope,” said the old man.
    More than a little perturbed, Satan asked, “Well, why aren’t you afraid of me?”
    The man calmly replied, “Been married to your sister for 48 years!”

    in reply to: Beko WMA1512 #172182
    gegsy
    Participant

    Re: Beko WMA1512

    Many thanks Dave, and Arcelik to you 😆

    Cheers

    Greg

    in reply to: Bosch Fridge Freezer Fridge temp 15C #167368
    gegsy
    Participant

    Re: Bosch Fridge Freezer Fridge temp 15C

    I think you need an engineer personally as there are numerous tests that can be undertaken to determine what is actually faulty. I am not at liberty top divulge this info for numerous reasons, sorry. Try link on my sig for nearest engineer.
    Regards

    Greg

    in reply to: Guess the sig. #171744
    gegsy
    Participant

    Re: Guess the sig.

    I resemble that remark Chris 😆

    Greg

    in reply to: TMS #171502
    gegsy
    Participant

    Re: TMS

    Thanks Chris for explaining that.
    Also Im glad I gave you an avenue to vent your love for the company aswell 😆


    Greg

    PS – Emailing Mrs P now 😉

    in reply to: bosch wfr2460gb/01 #171988
    gegsy
    Participant

    Re: bosch wfr2460gb/01

    Hi
    Shock kit is p/no 448032, use link on my sig to order.

    Thanks

    Greg

Viewing 15 posts - 5,566 through 5,580 (of 6,724 total)