Forum Replies Created
-
Posts
-
Re: Bosch SGS 3062GB/02 detergent compartment does not stay
It prises off but I usually change the whole unit.
Its a 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} cure no hassles later on. 😉Greg
Re: Bosch SGS 3062GB/02 detergent compartment does not stay
Hi
Usually the spring of the flap gets mangled. A kit p/no 166630 is available.
All can be done without taking door apart, but it can be a fiddle 😉
Worse case scenario you may need a new dispenser p/no 490467.
These spares are available by contacting spares@ukwhitegoods.co.uk if required.Caution when removing and installing the dispenser unit as the stainless steel edges are quite sharp ❗
HTH
Greg
Re: blocking off the hot?
Looked like a 2p 😉
Good tip aswell P45 😀I was teasing, hope I haven’t made you a erm…… Mad Rat 😆
Greg
Re: blocking off the hot?
Penguin45 wrote:Tight git? 😀
Looks like you was right, he has used a 2p 😆
Greg
Re: bosch shv55m03gb/55
Providing there is sufficient water pressure and you can hear it fill, I would go with a faulty flow meter/impellor jug; p/no 424099 😉
Greg
Re: bosch wvf2402gb/02
Not a problem happening now, I remember the Maxx w/ms weights falling off 😆
They have since changed the way its held.
Sorry can’t be of any real help.Greg
Re: Siemens HB34521GB/02
The BSH download section is pretty hit and miss at best :rolls:
P/no for manual is 519655 and an email to spares@ukwhitegoods.co.uk , should get you sorted. 😉Greg
Re: lpr600 – 11 flashes!
Hi
Its a water level error, usually two things. 😉
1/ The Water Indicator (WI) gets clogged with crud and will be in need of a tooth brush to clean its grill. (WI is below filters at a 3 oclock position)
2/ Them god awful askoll recirculation pumps (They judder and splutter and generally give poor recirculatuion ) 😆Power off if you are to attempt any repair on this appliance and watch the metal edges as they are razor sharp 😉
Greg
