Forum Replies Created
-
Posts
-
Re: Bosch Fride/freezer – E2 error code
Im not sure on that maybe your engineer could email that and the mod so we all can benefit 😉
Greg
Re: Bosch Fride/freezer – E2 error code
liviterminator wrote:Can anyone recommend a source for these boards, the repair guy I contacted wasn’t interested in supplying unless they fitted it as well… 😥
Hi try here shop@
Regards
Greg
Re: Bosch Fride/freezer – E2 error code
The fridge refrigerant is fed to the from the freezer via a diverter valve. This howeever has nothing to do with an E2 error being displayed.
Greg
Re: Bosch Fride/freezer – E2 error code
Hi
Not that I know of. It doesnt sound a good option personally.
I would use an engineer from the link below if I were you so that you get the correct information. 😉
GregRe: Bosch Fride/freezer – E2 error code
Hi
WHy are you in the freezer area?? When E2 is a fridge evaporator sensor problem?Greg
Re: Bosch Fridge Freezer Fridge temp 15C
Hi
A model would be a good starting point. Take L/H salad drawer out and look on the sidewall for the enr and FD numbers please.Thanks
Greg
Re: WIRING DIAGRAM FOR BEKO WMA1613S
Hi Mr wayne,
I don’t think that info is available to the public, but if you would tell us the fault we may be able to help.Greg
Re: Bosch WAA2416GB
Hi Jim
I have no idea of origin.
FYI the model is either WAA24160GB/01 or/04.
I reckon its a Balay machine if that helps.Regards
Greg
Re: Bosch Fride/freezer – E2 error code
E2 is fridge evaporator sensor which is fitted into insulation of appliance at manufacture. Unless you want to drill it out (messy) I would go with the PCB.
Greg
Re: whirlpool chest freezer AFG521/G
Hi
Maybe held tight with ice? Im sure johnmac11 will be able to shine more light on it for you 😉Greg
Re: whirlpool S20 B clicking
Hi
£72.50 inc Vat + parts isnt a bad call out considering the appliance in question.
Have changed a few boards; not to bad to change but you may not need both boards and they are around £100 a shot you may be better with engineer call.
As for lifespan, how long is that piece of string, can depend on a few factors ie clean mains,surges etc.Greg
Re: Identifying Model Number
Hi
Alternative model number may be on back. Failing that a photo may help to certain engineers on here 😉Greg
Re: water supply
Hi
In a nutshell you save water,electricity and save energy by not firing up the boiler for hot water which would not have reached temp by the time the machine had stopped filling.
They do wash longer because of the low water used but the savings in energy are noticable.
Hope that clarifies it.Greg
