gegsy

Forum Replies Created

Viewing 15 posts - 106 through 120 (of 6,724 total)
  • Author
    Posts
  • in reply to: Spam #168227
    gegsy
    Participant

    Re: Spam

    antencegero
    Post deleted, acne cure and link to his shop

    Greg

    in reply to: bosch washing machine #281387
    gegsy
    Participant

    Re: bosch washing machine

    Ok matey , well contact kwatt for access as you will get more help and access to more stuff 😀

    Greg

    in reply to: bosch washing machine #281385
    gegsy
    Participant

    Re: bosch washing machine

    It maybe a fault code of water inlet problem.
    It may do the wash ok but; failing in the rinse section when a differnet valve is requested which maybe faulty and timing out because of this.
    Un plug appliance and check inlet valve reading fro app 2 k ohm.

    Greg

    PS – Are you trade? If so please contact site admin for access 😉

    in reply to: bosch sgs55c02gb/01 #281395
    gegsy
    Participant

    Re: bosch sgs55c02gb/01

    Most likley culprit is the impeller jug/ flow meter that is in line (internally) with the fill hose.
    P/no 424099

    Greg

    in reply to: bosch sgs55c02gb/01 #281394
    gegsy
    Participant

    Re: bosch sgs55c02gb/01

    Moved you to trade section Gordy 😉

    Greg

    in reply to: BOSCH WFL2260UK/04 #281377
    gegsy
    Participant

    Re: BOSCH WFL2260UK/04

    Probably the triac has blown that feeds that valve.
    If you can trace it back from the valve to the faulty triac ,Im sure you can just solder a new one in 😀

    Greg

    in reply to: bosch washing machine #281383
    gegsy
    Participant

    Re: bosch washing machine

    Possibly a motor problem.
    A model number would be handy though 😉

    Greg

    in reply to: tecknics range cooker #279509
    gegsy
    Participant

    Re: tecknics range cooker

    Hi
    Rear cover at back of appliance, then wadding peeled back after that, then next panel with fan motor and element attached to it.

    HTH

    Greg

    in reply to: Bosch elec fan oven need manual please. #279592
    gegsy
    Participant

    Re: Bosch elec fan oven need manual please.

    Hi
    Its not in Bosch download section but is available from Bosch themselves, quote part no – 580228 to them. Its app £6-00.

    Greg

    in reply to: tecknics range cooker #279507
    gegsy
    Participant

    Re: tecknics range cooker

    If its the one Im thinking of you need to remove the 4 screws from inside cavity, then with rear panel removed ,carefully peel back the wadding halfway from right to left.
    Then remove screws holding plate that has circo element and fan unit attached to it; once done, fan motor will be accessible 🙂

    Greg

    in reply to: Neff W5340XOGB/26 #279516
    gegsy
    Participant

    Re: Neff W5340XOGB/26

    Hi Toni
    F12 is aquastop failure, hope that helps.

    Greg

    in reply to: BOSCH HBN7050GB/01 main oven problems #276691
    gegsy
    Participant

    Re: BOSCH HBN7050GB/01 main oven problems

    Sounds like a tiring circotherm fan motor IMHO 😉
    Power off if your are to attempt any work on the appliance :plug:

    Greg

    in reply to: get one #278823
    gegsy
    Participant

    Re: get one

    Put him on ignore and move one!! He is just a time waster 🙁

    Greg

    in reply to: get one #278821
    gegsy
    Participant

    Re: get1a2

    He is the human equivalent of Haier ie LANDFILL 😯 :rolls:

    Greg

    in reply to: NEFF S5443X1GB #278188
    gegsy
    Participant

    Re: NEFF S5443X1GB

    Im assuming GB/29 ??

    You have mail

    Greg

Viewing 15 posts - 106 through 120 (of 6,724 total)