[gegsy]

Re: Barclays Premier League 2007 – 2008 / Champions League

Almunia may have saved it 8) any way we still a game in hand 😉 :stir: 😀

Good result anyway 😀
Greg

[gegsy]

Re: Barclays Premier League 2007 – 2008 / Champions League

Tee hee, gotta dream but was possible. Technically 2-1 without the OG :rolls:

Greg

[gegsy]

Re: Whirlpool ADP 4504 flashing Start light

Hi
From underneath, its a twist lock.

Greg

[gegsy]

Re: Barclays Premier League 2007 – 2008 / Champions League

Arsenal 2 ( Fabregas 48, Gallas 93) – Man United 2 (Rooney 45, Ronaldo 83)

A fair result and an enjoyable game, these are truly the Premierships top teams 😀

Greg

[gegsy]

Re: Whirlpool ADP 4504 flashing Start light

I would presume faulty NTC/feeler sensor in the sump area below the filters.
It looks rather like a bullet 😕

Part available from spares@ukwhitegoods.co.uk if required.
Power off if you are to attempt any repair on the appliance :plug:

Greg

[gegsy]

Re: Tecnik Dishwasher SE6TIE1GB/12

I would have a look at the mains socket and plugtop for signs of overheating. Have seen this a few times.
Wouldn’t do ant harm to look for dry joints on PCB 😉

Greg

[gegsy]

kwatt wrote:Why would someone in Wales support an English team with mostly foreigners playing?

I used to support Liverpool all through school, the Dalglish,Hughes and McDermott era app 1978 ish.
Lost interest in footy mid 80s, Dad always supported Arsenal and I asked him the same question and he said its the way they play the game, abit like utd. They want to play not defend like some teams.
So I watched and I was then hooked on the gooners. Plus It gave me a bonding with the old fella 😉
Hope that answers your question, confused in Kilmarnock 😆

Greg

[gegsy]

Re: Barclays Premier League 2007 – 2008 / Champions League

Lets get ready to Rumble !!!!!!!!!

Arsenal V Manchester United

Barclays Premier League
Emirates Stadium
Saturday, November 03, 2007, 12.45pm
Live on

This should seperate the men from the boys and in doing so give us some entertaining footy 😀

Greg

[gegsy]

Re: Whirlpool ADP 4501/5 – Start Light Flashing 11 Times

Depending on how hard you “scrubbed” you may have damaged the membrane of the water indicator ( I did say be careful). It may be that the wax has solidified and jammed the WI 😕
4 is a no drain fault.
Try a reset holding “start” button down for approx 3 secs and see if fault clears.

Greg

[gegsy]

Re: Video Tutorials?

Penguin45 wrote:Er, he did…. Quite early on.

Chris.

24 secs in 8)

Greg

[gegsy]

Re: Leibherr (and CDA) appliances?

I would go with the Liebherr IMHO 😉

Greg

[gegsy]

Re: Flooded Siemens

The board is more like the £100 mark, but the £200 may include his time etc 😕

Greg

[gegsy]

Re: Is an induction hob the way to go?

Just to add to Ken, most fitters/installers tend to just bang these hobs in as per standard hobs. Please adhere to the ventilation requirements for your particular hob 😀 .

Greg

[gegsy]

Re: Barclays Premier League 2007 – 2008 / Champions League

Greg 😆

[gegsy]

Re: Whirlpool ADP 4501/5 – Start Light Flashing 11 Times

Hi
You may have optical or standard.
If you remove the filters and look at the recess in sump, at approx 3 o’clock position you will either see a weird looking round clear protrusion (optical water indicator) or a round honeycombed grill unit (standard water indicator)
The optical can be cleaned easily with a cloth.The standard indicator has to be cleaned with care, preferrably with a toothbrush; being careful not to be too rough as to puncture membrane behind the honeycomb grill.

Greg

[Author]

Posts