[gixerk1]

Re: Neff s4840x0gb/06 stopped mid cycle

hi guys
pondered overnight the water in the bottom of the machine
so today dragged it out a bit difficult due to it being intergrated
unplugged and tipped it to the side with the least exposed wiring
then mopped the floor and hit the button and of she went
thanks again for your help
tim

[gixerk1]

Re: Neff s4840x0gb/06 stopped mid cycle

thanks for everyones help i was thinking that myself
i know when im beat will make an appointment monday
thanks again
tim

[gixerk1]

Re: Neff s4840x0gb/06 stopped mid cycle

apparantly water did overflow slightly thats why she switched it of
and water did overflow i pressume into the hinge area
tim

[gixerk1]

Re: Neff s4840x0gb/06 stopped mid cycle

thanks for clearing that up martin have tried the buttons still no joy
do you think it may be a pump failure to to pumping into a blockage apparantly this has happened before but the water just comes into the sink im getting desparate now as the wife is waving a pair of marigolds at me
tim

[gixerk1]

Re: Neff s4840x0gb/06 stopped mid cycle

have had another look today no dots under buttons have removed wood facsia nothing there have tried everything in manual still stuck im afraid also no apparent blockages etc
tim

[gixerk1]

Re: Neff s4840x0gb/06 stopped mid cycle

i have 5 buttons 1 main on/off and 4 programme buttons
65 intensive 65 normal eco 55 quick manual states to quick finish press 65 and 55quick this has no effect no buttons have dot as mentioned as it is a built in model would the dots be under fascia i have also removed a sticker near buttons and there is no dot either
just a thought could some gunge get down the dishwasher waste pipe cannot blow through it but i dont know if that is due to part of the cycle
tim

[gixerk1]

Re: Neff s4840x0gb/06 stopped mid cycle

hi
the only thing in the manual is programme interupt andspeed up programme both have been tried but to no avail
tim

[gixerk1]

Re: neff element question

thanks dave and your colleagues the oven is fixed many brownie points for me from mrs tim
thanks again
tim

[gixerk1]

Re: neff green classic oven not heating up

understood thanks very much will order one now
thanks tim

[gixerk1]

Re: neff green classic oven not heating up

sorry to be vague its the main oven that does not heat up
i have been searching the forum and as you say the element
seems the culprit following your safety guidelines is it a big job
how would you get to the part to replace it
thanks
tim

[gixerk1]

Re: american style fridge/freezer recomendations please

thanks don
personally i would try and save up and get a maytag or something along those lines but i think he is on a budget
tim

[gixerk1]

Re: decor panel holder

sorry no make or model its similar to the easy hinge system i found on
google but my one looks a lot more sturdy the bit thats broken and now lost
was the thin metal strip that runs to the back of my washer it attached to the
magnetic door support via a thin round bolt and then braced via a screw at the back to be honest i never had much luck with it kept dropping down during the spin cycle i could mail a picture if that would help my washer is zanussi wjs1397w
thanks
tim

[gixerk1]

Re: salt left on crockery

sorry for being vague i put no1 on the salt dispenser i know you cant just use tablets i was wondering how much salt would be needed to fill up after not being filled for a long time
the marks seem to have gone but this was after a couple of washes do you think it has just settled down after being filled with salt
tim

[gixerk1]

update

after another wash the glasses are almost perfect rinseaid on three salt on 1
im still at a loss to know why this is i must have put about 1 kg of salt in could this have been the problem or has it recharged the softening process
tim

[gixerk1]

Re: salt left on crockery

thanks again we do use rinse aid and tablets and after they have run out i will
move to seperete items my gut feeling its the water softner i dont know how it works or were it is but i filled up with salt this mornin and i could fill up now
if i had any it seems to just go after one wash i cleaned the gaskit and around that area
tim
i could not see a softner on the neff schematics would you be able to tell me where it is located

[Author]

Posts