[gobezza]

Re: Hotpoint TDL11P Front Drum Seal coming off.

No, you don’t understand, this model has never had bearing pads on, there is no place for them to fit, bizarre I know…..

[gobezza]

Stop using Non Bio Liquid, switch to powder, stop washing at 30 on a regular basis, the hotter the better.

Use 90 when doing a maintenance wash using Bi carb or bleach…..

I have this conversation with every customer I see

[gobezza]

Does sound like a PCB fault, is the pump fed directly from the PCB for both wires? Sometimes they share a neutral through the heater or fill valves…..

[gobezza]

Re: Hotpoint Aquarius WMM39 fills with water then stops

What can happen is the washer fills on one valve for a small amount of time then switches to a different valve and it sounds like this second valve is jammed/faulty.

I would check the operation of all the valves and the continuity across the terminals of each valve, should be around 70 K ohms.

[gobezza]

Re: Bosch Excell H24 Error Code

Its H24 not F24!

I’m an engineer myself, but none of the literature I have gives me a H24 code. I know how to check the pump, but its emptying fine.

It has gone through the program twice since the fault but would like to know what H24 means……

Any takers?

[gobezza]

Re: Whirlpool American F/F not cooling properly – please hel

What exactly did the British Gas engineer say was the problem, did he mention a gas leak at all?

[Author]

Posts