Forum Replies Created
-
Posts
-
Re: Smartdrive 085 fails to go into spin cycle
Parts Manual only try http://www.stokes-aus.com.au/StokesAP/M … {e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}20708.pdf
You may even be able to purchase it from them.Re: GW609 – Washes,pumps out but wont spin
I managed to get hold of a spare sensor rotor and micro switch. I fitted the sensor rotor and still the same. I fitted the micro switch and still the same. I then in frustration worked the new micro switch a few times and suddenly there was a click and it started to spin. I am guessing a dry soldier joint (main board) or a loose wire somewhere. I replaced both my sensor rotor and micro switch and its still working. Let me remind those of you how stupid it is to work these switch whilst its still connected to the power….as an ex sparky I should know better…I gave myself a hell of a shock. That will teach me for being over confident. Anyway thanks for your help. Should anyone think of anything else that it may be let me know. Thanks for the feedback most appreciated.
Re: GW609 – Washes,pumps out but wont spin
Thanks for the prompt reply. I had yesterday checked the pump which appears to turn and it pumps out fine. I even did a hot wash through thinking that it may have been blocked. Any thoughts on the out of spin balance sensor or something like that. I am just guessing but do you kno w its location in the machine ? I thought that perhaps its sensing that its out of balance and wont spin the machine ?? Any other ideas.
Thanks in advance
