Forum Replies Created
-
Posts
-
I had a problem withone of these machines, where ALL lights on the front panel were flashing and no program could be selected, I took theboard out and noticed a 680uf 10V 105c capacitor blown on the main board, 30 pence for a replacement and an easy repair for DIY, 6 mths later machine going strong. Initial cheap components on board, typical mass production.
Re: HELP HELP !!! BOSCH WFL2063 ORANGE MOTOR WIRES
No Problem guys, thanks for the help in general, didnt realise about Rule 8, and fully understand why, I will get a PRO to sort it out for me.
Regards
JimRe: Miele s560 and s570
I had a similar problem with one of these, and the problem WAS the PCB, it was actually the capacitor on the PCB that had a broken leg, I replaced the Capacitor, and PRESTO. Still going strong after 7 mths.
Re: Whirlpool AWM 6100/1 Clicking
I checked the filter side of the pump but not the drain hose to pump, I will check it on Friday. Many Thanks for the prompt reply.
Cheers
JimRe: Hotpoint TDC30P Wiring problem.
I know its not a great idea to use trial and error, but I had no alternative, I could not afford an engineer to call out, especially when so much info is available on this forum, the way I see it the machine was knackered so what did I have to loose. The machine is working the best now.
