[grs]

Re: Zanussi Aquacycle 1500 drain problems

Hi many thanks for getting back to me have replaced pump but still no joy have stripped board out there are 3 black boxes seem to be 12 volt converters all seem OK ran meter continuity through them all and all seem OK the coil on the board has seen better days but after clean up it seems OK no melting of coil visible or dry joints and all four wires are still connected to board again ran meter over board and it seems OK but I have left my other meter at work and I can not check resistance on them all, All I can do is put it back, I did think it might be board but wasn’t sure any other help is appreciated many thanks martin
regards
Tony

[Author]

Posts