[GrumpyOldHector]

Re: Dishwasher – Siemens Avantgarde SE25831

Thanks for the info.

Removed the RH side panel and watched as the system was filling.

Basically, the water feed to the washer pump housing was blocked.
As a consequence, as the water flow was enabled, the restricted flow to the internal of the machine forced the overflow to trip, and then the empty pump would trigger, the water level would receed, the trip would reset and the pump would stop!

It was this cycling which was strangling the machine of water.

I dismantled the matrix assembly & cleaned out the pipe with a bottle brush and now it works a treat. 😆

Only question I have now is why does the clean water inlet get fouled up??

Many thanks again – great site.

[Author]

Posts