Forum Replies Created
-
Posts
-
Re: BEKO QOM 246B
Thanks yet again Dave.Fitted new stat,had already fitted temp. sensor and gets to temp ok when on no.2 (takes longer to reach) but not no3 when fan element should also be working.I have a feeling that fan element has gone so that when she puts it on 3,which she always does,the fan is running but element is not heating.Will buzz out element tomorrow but I have found in the past that if an element (kettle,bulb or cooker) has blown trip switch goes but didnt this time.What do you think ?
Re: BEKO QOM 246B
Hi Dave.Looking on eBAY and found a seller (SUDS ONLINE) with item BEKO EDF223000X.This is exactly the same as I took off but it then shows 2 more pics of a later version (Which I have bought) and apparently the design has been changed which would explain the confusion.Am now going to fit this and will let you know the result,
Cheers
GrahamRe: BEKO QOM 246B
Also Dave,would there be a temperature sensor (Item 587) on your pic, which I have already replaced, as well as a thermostat.
Cheers
GrahamRe: BEKO QOM 246B
Sorry Dave but really confused.The item I have removed looks exactly like Pt No 300180155. The part on the pic you sent earlier looks like a 210110549 fitted to a bracket.This is the button stat that I have but this is not fitted on our oven that I can see
Regards
GrahamRe: BEKO QOM 246B
Sorry Dave,tried to post pic but too large and not sure how to make file smaller,
GrahamRe: BEKO QOM 246B
Hi Dave.Lids off again.This is Pt no 161471.052 which I have removed.So does the other item 263410017 replace this although they look different.I thought this was a safety cutout,not the oven stat although fixing centres are identical. 😕
Thanks for your patience
Graham
