Forum Replies Created
-
Posts
-
Re: Washer-dryer John Lewis JLWD1408 mysteriously shows E10.
Martin, I do not think your judgement is correct. I have enough skills to do many things but having more information definitely helps to do exactly what is needed without braking a clip etc.
I changed the valve but symptoms are the same. I laid the washer on the floor, disconnected the sump hose on its widest end and touched and looked inside. It is a bit dirty but no congestion there at all.
Would you mind me asking what is the link between water pressure E10 error and the sump hose which would give E20 error, would not it?
What could be another reason for E10?Re: Washer-dryer John Lewis JLWD1408 mysteriously shows E10.
Matrin, could you tell a little bit more on what exactly needs to be done? Is there any youtube video of service manual etc?
Re: Washer-dryer John Lewis JLWD1408 mysteriously shows E10.
Thank you guys. I have ordered one and will let you know once I receive it and fit.
Re: Washer-dryer John Lewis JLWD1408 mysteriously shows E10.
Thank you again.
1. Yes, it appeared to be very easy to find it. It looks like this one http://www.ebay.co.uk/itm/ws/eBayISAPI.dll?ViewItem&item=190584666597 although the numbers on it are different: 33690065257 and 124947214. Would it still fit?
2. Resistance of black and white solenoids is both 3.7 k? and the green one is 5.2 k?. Is this a sign of a fault?
Can I somehow make sure that this is exactly valve and nothing else before I order and wait for it?
Thank you.
Re: Washer-dryer John Lewis JLWD1408 mysteriously shows E10.
Thank you, iadom.
> It would help if you could give us the pnc (product number) of this Zanussi machine.
The prod.no. is 914603110 00
Type: P6858488Is there any video or PDF manual which describes how to get to this valve? Do I understand it right that if resistance of its solenoids is far from zero then it’s faulty?
Also, can a building works and dust around the machine result this fault and therefore can I try to vacuum it somewhere inside?
