happyskyper

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • in reply to: indesit washer WD12S handle snapped off #163523
    happyskyper
    Participant

    you can do it!

    in reply to: Indesit WD12S #288009
    happyskyper
    Participant

    Re: Indesit WD12S

    pozdrav restelice!


    I have the same model that is about to go to the tip (subject to me managing to fix the WF560 washing machine). It is leaking so my problem is on the wash part so if you need any spares for yours I might be able to help you out.. between the two broken ones we might save at least one of them from the tip and do our bit for the environment..

    keep me posted.

    happyskyper

    in reply to: Help with Hotpoint WF560 #276976
    happyskyper
    Participant

    Re: Help with Hotpoint WF560

    I have done the things mentioned above.. ie cleaned the pump/filter assembly (not very pleasant at all) but the problem is still there.. can anyone please help…

    in reply to: Help with Hotpoint WF560 #276975
    happyskyper
    Participant

    Re: Help with Hotpoint WF560

    Ive just got a wf560 from a friend with a similar problem.. (he told me that it doesnt complete the cycle because there is water left in the drum.. so switching off at the mains is needed to open the door and manually drain the clothes

    I havent diagnosed it myself as I have yet to connect everything so I am looking for a bit of advice in relation to proper diagnosis..

    I was told that if I do a dry cycle on spin and if it works than the pump is the likely source of a problem.. is this a good way of diagnosing or is there something better..i.e a method or a sequence of things to try and see whats wrong.. I really dont want it to be a programmer because it wouldnt be economical repairing it.. unless of course there is one somewhere knocking about that works..

    thank you in advance..

Viewing 4 posts - 1 through 4 (of 4 total)