Forum Replies Created
-
AuthorPosts
-
heavyd1
ParticipantRe: Whirlpool American style fridge/freezer
hi tj5793,
not to sure what the evaporator looks like or where it is , can you point me in the right direction pleaseheavyd1
ParticipantRe: Help needed with Whirlpool S20D RSS33A/G please!
—
Temperature inside the freezer is greater than -11?C
Multiple causes for this error code. Usually however it will be a fault with the evaporator fan, compressor fan or the compressor itself.heavyd1
ParticipantRe: Help needed with Whirlpool S20D RSS33A/G please!
Have you tried to find the error code ?
1,turn the power off for 40 seconds ,
2 then turn it back on ,
3 wait about 5/10 seconds for the display to show
4 open the freezer door and push the light switch 3 times within 10 seconds then close the door.Doing this will start the error checking program,
07 will show in the window where the freezer temp should be,
it will then slowly count down to 00.If it finds a problem it will flash that code , it might flash 02 which could be the motorised air valve or rear circuit board.
At least it points you in the right direction. The list of codes are on this website , while this is going on the fridge temp window will show 0 which is normal.To cancel the error checking just push the light 3 more times or leave for 1 hour
-
AuthorPosts
