[Hotwire]

Re: MW511 Error on power up (00110001)

Hi all,

I have an MW511 and get the above error code. I checked the impedance of the solenoid, and its reading 62 ohms so obviously not the problem. I dont know if its getting 24V DC either as when I turn the machine on at the power point, it goes straight to beeping and giving me error code 49 – so it wont even attempt to fill etc, and I’m getting 0V at both solenoids..

What else could I try? Dont really want to pay some serviceman $121 to tell me when its simple fault finding – I just need to know what to look for!

Thanks
Lee

[Author]

Posts