[Hugosp]

Re: Zanussi Fan Over (fitted) ZBS260X not getting hot

Just an update. All fixed thanks. I removed and carried out an insulation test on the element. Then I managed to find and fit one.

Biggest problem I had was that the 4 screws holding the back panel in had rusted, and so had the holes. That made putting the panel back in the oven afterwards. I just used some thicker screws I found and secured it back.

The model number was correct btw. I also needed a product number to source the element.

Element was £35 – ouch! I had to get it fixed that day though. It’s in a property we let out and I don’t like to keep tenants waiting.

Thanks for your efforts in looking for the model number btw.

[Hugosp]

Re: Zanussi Fan Over (fitted) ZBS260X not getting hot

Thanks for looking for me. I’ll need to double check. It’s in our rented property. it’s about 3 years old and came from B and Q IIRC

[Author]

Posts