[ianlouisshaw]

Re: Fisher Paykell does not work (Diagnose code 136)

As it happens Penquin I do have a multimeter!!

I am unsure where abouts the motor wires are located. How do I locate these babies?

How do I check the continuty of the stator windings??

Sorry in advance for being a dummy washer machine mechanic!!

Thanks Penquin for your continued help

Cheers,

Ian

[ianlouisshaw]

Re: Fisher Paykell does not work (Diagnose code 136)

Penquin is their any way that I can eliminate this any further!!

I have checked the water pump via multimeter and it appears fine (30 ohms across the terminals).

I am able to accept the hot or cold water corretly (un-interrupted when in diagnose mode so I think both of the water solinoids are OK!!

The stator is able to be turned quite freely when power is removed so I think it apears OK whilst the power is off

How do I check the stator position sensor?? I do not know how to do this??

Many thansk for your help

PS> the washer is 12 years old, do you think I should just get a new one rather than persisting??

[ianlouisshaw]

Re: Fisher Paykell does not work (Diagnose code 136)

The code was from left to right:

ON-OFF-OFF-OFF-ON-OFF-OFF-OFF

i HOPE THIS HELPS!!

[Author]

Posts