[ikon]

Re: diplomat adp 8234 error e2

result!

I rang diplomat after sales service, it seems i have an extended warranty on the machine, so they’re coming out to fix it one week today.
Once I get an answer I shall post the fault and its resolution!
Thanks to everyone for their help!
lynne
🙂

[ikon]

Re: diplomat adp 8234 error e2

hi, there’s no engineer in my area from repairs@ukw, and the service number on my manual has an unobtainable number.
My local repair people won’t help because the error e2 is not known to them, and the manual says it’s not used on this appliance (!)

Does anyone have the number for diplomat after sales service, i’ve been ringing the mfi customer service number solidly for the last half hour with no repsonse!

many thanks

Lynne

🙁

[ikon]

ok, so i’ve poked a bottle brush into every orifice, and nothing gungy or nasty appeared, and the error still remains.
Anything else i can try before i call out the dreaded engineer – i’m trying hard not to, because i need a new back tyre on my motorbike…

[ikon]

Penguin, thank you so much for the super quick response!
Please can you tell me how i get to these tubes, as i seem to be just staring at a white plastic horizontal component with a recess where the centre filter goes.
Do i need to take the dishwasher out from under the unit (it is an integrated one)
do i need to unscrew this white base plate thing?
I’m nervous about pushing too hard with my bottle brush in case it gets stuck!
can i use a mr muscle toilet foaming pipe cleaner product on it?!

flippin’ heck, i hate it when things break down!
many thanks
lynne

[ikon]

Hi, i’ve bought a bottle brush, and have removed the 2 filters in the base (one silver, one white plastic).
There are several holes, one of which is covered with a black plastic hinged cover, perhaps a valve of sorts, and a couple of others.
Is one of these the outlet pipe?
What would happen if i undid the screws on the white plastic base, and removed it?
Can i get to the outlet pipe easier that way?

many thanks
lynne

[ikon]

Re: diplomat adp 8234 error e2

ok, thanks for the advice, i’ll try the bottle brush approach and if that doesn’t do the trick i’ll call out an engineer 🙁

thanks

[ikon]

Re: diplomat adp 8234 error e2

I’m pretty handy at stripping down machinery (I recently replaced the motor in my hedge trimmer)
How hard is this to do?
I see there are some screws in the base of the machine, near where the spray arm sits, is this what i have to remove to get to the metering tank, or the parts that get bunged up?
Do you know where i can get hold of an exploded diagram of this appliance?
again, thanks

lynne

[ikon]

Re: diplomat adp 8234 error e2

poo!
please can you tell me what’s caused this, so that i can prevent it from happening again?

I have a water softener, so don’t use salt in the dishwasher, and always use finish liquid gel.

thanks so much
lynne

[Author]

Posts