Forum Replies Created
-
Posts
-
Re: BOSCH WFL 2260 NOT DOING ANYTHING!!! HELP!! PUMP BROKEN
yes, i re tried it after moving debris, but it still made a noise, so i quickly turned it off, incas it was burning itself out!!.
anyway all systems go…………. thanks 😆Re: BOSCH WFL 2260 NOT DOING ANYTHING!!! HELP!! PUMP BROKEN
Problem solved! The pump is fine because the impeller is turning.The funny noise is because there is no water in the pump. Once the machine was allowed to fill with water it all sounded normal again. Thanks for everyones help. Great service! 🙂
Re: BOSCH WFL 2260 NOT DOING ANYTHING!!! HELP!! PUMP BROKEN
pump… askoll
art. 290408
mod. m50
code. 5500003078
0.2a 30w clfis that the info we require!!.
Re: BOSCH WFL 2260 NOT DOING ANYTHING!!! HELP!! PUMP BROKEN
thanks for the info above,
i have turned the washer onto spin only, the impeller spins ok, but there is a vibration coming from it, also the impellor can be pulled forward a few mm’s, is that rifght?Re: BOSCH WFL 2260 NOT DOING ANYTHING!!! HELP!! PUMP BROKEN
the er no is WFL2260UK/04 FD 8004 606435
Re: BOSCH WFL 2260 NOT DOING ANYTHING!!! HELP!! PUMP BROKEN
well after i took the wire out of the front compartment, i checked to see if the impeller would still spin, it does but it has the motion of a prop plane, as in it doesnt spin freely, it goes easy then hard then easy etc!!.
Re: aeg oko lavamat 72630 update problem!!!!!
well, the pump turned up, but unfortunatly the post man seemed to have run over it because it was crushed!!, i then emailed some photo’s of the damage to the spare parts sales, and they quickly replaced the pump, so i am just typing to say how helpful, and what a good service i have received from this forum and the spare parts office.
thank you very much. 😀 😀Re: aeg oko lavamat 72630 update problem!!!!!
checked the pump, cleaned it, it now works, but makes a strange noise, so i have emailed sales to get a new pump.
Re: aeg oko lavamat 72630 update problem!!!!!
thanks for info
i am going to take pump out and inspect it, if it prooves to be faulty, i will be in touch.
thanks again. 😛
Re: aeg oko lavamat 72630 update problem!!!!!
machine no.
pnc 914 002 096 01
is it easy to remove and refit the pump, and how much would one be?
thanks again. 😮
Re: aeg oko lavamat 72630 update problem!!!!!
is it easy to change the pump, and how much should one cost?
thank you 😮 😮
