[iwooding]

Re: SMEG UK80MFX1 – Oven and grill not working

thanks k i’ll try that!
ian

[iwooding]

Re: SMEG UK80MFX1 – Oven and grill not working

i’m afraid i can’t identify it from the diagram. it looks like a small square motor with the copper wire running round and it sits on top and in the middle of a raised circular piece (about 10″ in diameter) of the sheet of metal that covers the whole of the oven – below the gas pipes.
I mentioned as well about a broken connection on the main switch. Could this cause the whole switch to fail?
Thanks again for your help.

[iwooding]

Re: SMEG UK80MFX1 – Oven and grill not working

There is one broken connection on the main switch – it’s the one right at the back looking from front to back. However it doesn’t give any reading on the meter at all. All the connections that do give readings give closed circuit readings. I checked the old safety stat that I replaced and actually it was ok.
The only resistance I could pick up was a reading of 103 from a part that i can’t identify – under the hob cover midway back and slightly to the left. It has ‘mvl’ on it and the following:
RL148/1200 A2-
3020LH-464 aat
Hope that’s of some use!
Ian

[iwooding]

Re: SMEG UK80MFX1 – Oven and grill not working

my meter’s not working so i couldn’t check the safety overheat thermostat, i just replaced it anyway. i’ll get a new meter and check both the stats. i’ll have a look at the switch as well.
thanks for your help.

ian

[iwooding]

Re: SMEG UK80MFX1 – Oven and grill not working

I’ve replaced the safety overheat thermostat but it’s still dead. could it be the main stat or oven switch?

[iwooding]

Re: SMEG UK80MFX1 – Oven and grill not working

Thanks K I’ll try that.

[Author]

Posts