jafajones

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • in reply to: Fisher & Paykel Smart Washer 601 repeats wash cycle #193724
    jafajones
    Participant

    Re: Fisher & Paykel Drive 601 – repeats wash cycle

    Hi Bigsmokepiker et all, delay in response associated with the washing m/c being at our holiday location and have only just had chance to test your suggestion. (Dec/Jan is our holiday period)

    I programmed as suggested, no beep but light pattern changed after approx 2 secs.

    Changed Med water level to off per earlier advice.

    M/c works fine and switches off as expected as long as power not switched off at wall. If power to m/c lost then reverts to recycle mode and restarts at end of cycle.

    Rinse, final rinse and spin lights flash, reprogram as advised and again washer appears to work correctly until power lost for any reason.

    This is a holiday place so we will put with the problem – the m/c is probably used 20 times per year however would be great to fix.

    Appreciate any advice.

    Rgds

    Mike

    in reply to: Fisher & Paykel Smart Washer 601 repeats wash cycle #193723
    jafajones
    Participant

    Re: Fisher & Paykel Smart Washer 601 repeats wash cycle

    Thanks bigsmokepiker, much appreciated.
    😀

Viewing 2 posts - 1 through 2 (of 2 total)