[jamesenewton]

Re: Beko DW602 Dishwasher

Just fitted the new flow meter with little improvement. At first it filled with more water but the water never got hot and it hasn’t been pumped through the arms. I have tried different settings and it now seems to be as bad as previously. What else can I try or should I bite the bullet and either get someone to look at it or buy a new one, it seems like a waste of money on the parts I have replaced so far.

Thanks

[jamesenewton]

Re: Beko DW602 Dishwasher

Does anyone know if the part SKU: 1760900100 would work. I assume it would as it says for DW600. The part number is slightly different my part is 176090xx00

Thanks

[jamesenewton]

Re: Beko DW602 Dishwasher

I will take a look. Could it not be the pcb in the water flow meter? Thanks

[jamesenewton]

Re: Beko DW602 Dishwasher

Thanks, do you mean remove the cupboard door panel as it’s integrated?

[jamesenewton]

Re: Beko DW602 Dishwasher

Thanks,

Would that be the same as the water flow meter?
http://www.bekospares.co.uk/water-flow- … id=2195206

[jamesenewton]

Re: Beko DW602 Dishwasher

Hi thanks for your reply,

The amount of water is just around the filter in the middle and not over the whole base. I have taken the sides off and I can see the water filling in the tank. I can leave it for an hour or longer and in that time, a bit of water comes in after a few minutes it drains out and it repeats this without any water going through the arms. I have tried resetting and different programmes and even added additional water. I didn’t know if it was the capacitor but now wondering if it’s the water flow meter.

Thanks

[Author]

Posts