[Jammy1959]

Re: Hotpoint FF pools of water

MKR – Many thanks for the heads up on the drainage routing scenario. My model is intergrated, so I won’t be pulling it apart to check it out !
If the problem happens again I will be contacting Hotpoint and questioning the design and ask for the drain pipe to be re-routed – it’s only 14 months old.

[Jammy1959]

Re: Hotpoint FF pools of water

Hi there,

Just been ‘googling’ the problem and saw your post.
I have a Hotpoint COMBINATION 70/30 FRIDGE/FREEZER HMB3121.

It’s just over 1 year old and collects a big enough puddle of water at the bottom to keep goldfish!

I have just followed the ‘poke the drainage hole procedure’ – I have used a long drinking straw. I have also pulled the lower glass shelf a few mm forward so that it is not too close or touching the back panel of the fridge.

Will see how it goes.

[Author]

Posts