[janward69]

Re: Candy CMD146-80 Not heating.

hi,
thanks for the response. I made a slight boo boo on my diagnostic. the tumber dryer section works fine (i found that out to my dismay when i burnt myself – school boy error)

how serious a fault is an earth leak – is the machine economically repairable? and if so any guestime on repair costs.

Again, thanks for your help.

Jan

[janward69]

Re: Candy CMD 146 – Powers up but wont run programme

on friday i managed to get the machine to work (without a load) and today after having a look at the pcb and putting it back together i placed the machine on a 3hr delay wash. just came home and it is doing another wash (without a load)

Could there be any other faults with it or does it still seem to be the pcb?
Thanks

[janward69]

Re: Candy CMD 146 – Powers up but wont run programme

thanks for reply, spoke to candy and they said its most likely a timer fault?
the pcb, what fault would i be looking for? i have googled the pcb to get cost quotes, one is £80 – the main board and the other is £13 – the one at the start/pause.

Can this be easily fixed or will this be a specialist job. i have been quoted £104 for parts and labour from another company.

thanks again.

[Author]

Posts