[jay4eff]

Re: Indesit DI620 – Please help 🙂

Got the PCB yesterday, fitted tonight and the dishwasher is now working perfectly (for an Indesit!) 😀

Total cost to repair £36 not £130 plus labour as quoted by our local
(Chorley, Lancs) Highwayman.
It is now obvious he hadn’t got a clue what was wrong with the machine and just made a ridiculous price up so that I would either tell him where to go or buy another machine!

Thanks again Jim for the invaluable advice

Jerry

😀

[jay4eff]

Re: Indesit DI620 – Please help 🙂

He didn’t hang around long, said he would phone me with the full price and never got back to me 😡

I will order the PCB and let you know how I get on

Thanks again

Jerry 🙂

[jay4eff]

Re: Indesit DI620 – Please help 🙂

Thanks for the quick reply, he said that there was a further pcb under the machine near to the heater terminals, but I can’t locate one. the heater element is ok.

The serial number is 50907 2251

Jerry

[jay4eff]

Re: Indesit DI620 – Please help 🙂

I realise that this is an old topic but I have just discovered these forums after developing the same heater fault on my 3 year old Indesit DI620.

I Had a local company look at it and was told that the fault lay with a pcb under the machine neater to the heater terminals and that it would cost about £100 to replace and a further £30 for the eprom to fit on to it. Sounds improbable after reading this topic.

Can anyone shed any light on this before I dipose of the machine or just buy the pcb mentioned in a previous post.

The heater element itself is ok.

Thanks in anticipation

Jerry

😕

[Author]

Posts