[jayar]

Re: Hotpoint D/W DF62 (Bosch) not emptying

Martin

Thanks. New pump sorted the problem. My guess is that they contain a permanent magnet which loses its strength over time. Dont suppose there is any way of testing this though.

rj

[jayar]

Re: Hotpoint D/W DF62 (Bosch) not emptying

Martin Thanks for your response.

My problem is this. Is it possible that a pump that seems to work OK when removed and bench tested is in fact faulty?

I was hoping someone with experience of these machines would say that they are pesky little critturs and do that just to confuse amateurs. Change the pump.

It seemed to me that the pump was pretty weak.

rj

[jayar]

Re: Hotpoint D/W DF62 (Bosch) not emptying

Thanks Clive for your quick response.

I have checked and rechecked for any blockages and everything is completely clear. The thing is in pieces on my conservatory floor so I can get a Good Look Inside.

As I say the removed pump runs fast and powerfully but I wonder if this actually means anything

I have been here before with dishwshers making assumptions about a fault and replacing a part only to find that it something entirely different.

Is there anything else I should check?

jr

[Author]

Posts