[Jaybee1967]

Re: Siemens dishwasher shows "tab"/pressure chamber

btw I filled the liquid agent through the little hole in the upper right corner..

[Jaybee1967]

Re: Siemens dishwasher shows "tab"/pressure chamber

Hi

I managed to found out what the problem was.. or at least what solved it .. I emptied as much as I could of the water tank (reservoir) on the left side .. Locked the 4 holes in the bottom and fillede 1.5 l of liquid agent to remove calcium – decalcify? (called Kalk væk” in danish) in the tank and waited until the day after.. assembled the water tank.. and immiately I could hear that it filled with water much faster than before and the pressure pressed the little white knob out and engaged the blue lever on the pressure chamber so the water could enter the machine.. 🙂

Thanks for your help.

[Jaybee1967]

Re: Siemens dishwasher shows "tab"/pressure chamber

I agree that it is poor water pressure .. Actually when I changed to view the display in the video the water had made it to the top ..

I have made a new video here..

https://www.dropbox.com/s/7vgphvcjokcvt … 6.mov?dl=0

I will have to look to the heat exchanger outlet valve tomorrow.

Thank you for your help so far.

[Jaybee1967]

Re: Siemens dishwasher shows "tab"/pressure chamber

According to the manual minimum water pressure is 0.5 bar and it also states that “Water supply min 10 liters per minute” ..

[Jaybee1967]

Re: Siemens dishwasher shows "tab"/pressure chamber

I took off the aqua stop .. bucket under and opended for the water.. It took 1 min to fill 8 liter = 2,11 us gallon. Is this ok?

[Jaybee1967]

Re: Siemens dishwasher shows "tab"/pressure chamber

I have checked the filter in the aqua stop but it was clean/ok. Can I check more?

[Author]

Posts