[jaygrunt]

Re: Help my washing machine wont drain 🙁

Penguin45 wrote:Check resistance through pump coil as a starting point – 190 ohms (approx) is good. Check pump motor “pings” round easily – they do wear. If still no joy, measures coil from the other end of the loom – there should be only a marginal increase in resistance. If still no pump action, the pcb may have bought it.

Stay safe, power off if working on the machine yourself.

Penguin45.

Cheers for that but ,being a complete – lets take it apart and see whats wrong ,type of guy -I didnt understand what you have put.
I have taken off the pump and it does seem to ping(the rotor inside ping when you move it).
Please could you explain what you mean by ‘measure coil from the other end of the loom’
Thanks

[jaygrunt]

Have you tried cleaning the filter/s?

[Author]

Posts