jazzbutler

Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • in reply to: Best vented dryer 2014? #416371
    jazzbutler
    Participant

    Re: Best vented dryer 2014?

    Cheers kwatt. Helpfully detailed as usual.

    in reply to: Best vented dryer 2014? #416369
    jazzbutler
    Participant

    Re: Best vented dryer 2014?

    Cheers again.

    in reply to: Best vented dryer 2014? #416367
    jazzbutler
    Participant

    Re: Best vented dryer 2014?

    Cheers for reply and advice. Bring on good drying weather!

    Have you any experience drilling through cavity walls for the vent? Do people do anything to maintain the structure of the wall?

    The AEG vents left, right and back. Are you saying that the back vent for a future machine could be in enough of a different position as to mean we’d need a new hole?

    jazzbutler
    Participant

    ISE Wahing Machine 1607w 10 year warranty

    ISE Wahing Machine 1607w 10 year warranty
    Dear prospective washing machine buyers,

    I’ve had such good service out of the £950 washing machine I bought from ISE a year ago, that I wanted to post this to say thanks.

    A brilliant family washing machine.

    We use quick wash a lot, and the 8kg wash.

    Quick, thorough, quiet, and looks like it’ll last another 20 years, but having a 10year warranty is very reassuring.

    Now I’m just looking for an equally well-made, efficient and durable fridge-freezer. Any suggestions? 60cm to 70cm wide, and as tall as possible.

    Cheers!

    JB

    in reply to: New ISE 10 banging noise with 5 to 8 kg load at 1600 spin #357941
    jazzbutler
    Participant

    Re: New ISE 10 banging noise with 5 to 8 kg load at 1600 spi

    The ISE 10 washing machine is back in action. Banging problem was actually a cake tin in the cupboard next to it.

    I posted two months ago to say that there was a banging noise on my new ISE 10 at high spin speeds. The engineer who installed it suggested taking it out and checking that the floor was level. When I slid the machine out, three cake tins came clattering down from inside the cupboard that backs on to the machine. The banging noise was the sound of the cake tins clatterning against each other and against the side of the machine.

    Doh!

    JB

    in reply to: New ISE 10 banging noise with 5 to 8 kg load at 1600 spin #357940
    jazzbutler
    Participant

    Re: New ISE 10 banging noise with 5 to 8 kg load at 1600 spi

    Thanks. I’ve emailed ISE.

    There may have been a single heavy item, or at least an item that holds more water than the rest.

Viewing 6 posts - 1 through 6 (of 6 total)