[JCLAB]

Thanks for the tip Dave.
I will check this out tomorrow and see if it is the culprit.
JonathanC

[JCLAB]

Great, thanks for the tips Dave.

[JCLAB]

Such great feedback thanks guys.
If there was a ‘buy me a coffee’ button, Id be punching it like a Las Vegas pensioner!

I have checked the main pump inlet as suggested by [USER=”4209″]electrofix[/USER] – all seems clear (see pic).

Then did the check of the water distributor suggest by [USER=”19014″]andyjawa[/USER] and this seems fine too. Did a video of the spinners and water is switching between the top and bottom one – albeit at a super low pressure so they almost don’t turn.

Here is the video:
https://vimeo.com/910163820/c0b6892d40?share=copy

So…. main pump replacement do we think?

Thanks again to all the helpful assistance from you guys on this. Much appreciated.

JonathanC

[JCLAB]

Ah.. exccellent schematic thanks.

Were you suggesting I should be able to see into the main pump using mirror etc as you describe in your first message?

Thanks again,
Jonathan C

[Author]

Posts