[JoeMac90]

Re: Electrolux: Ikea Renlig DW45 : Not Draining

Thank you for your help, Dave

[JoeMac90]

Re: Electrolux: Ikea Renlig DW45 : Not Draining

Here’s the picture of the board:

Let me know if you need any more info.
Thank-you

[JoeMac90]

Re: Electrolux: Ikea Renlig DW45 : Not Draining

Hello electrofix,
Thank you for your reply.
The dishwasher waits for 5 minutes on startup and there are no signs of the pump trying to pump/start, then I get the 2 beep error.
I have check continuity of the cables through all wring back to the board.and there are no problems.
There is 40V shown across the pump cables.
If I connect the pump to mains volts it drains.
I think the problem could be the control board but cannot see any visible errors with components or soldering.
Are there any sensors which may stop the pump starting?

[Author]

Posts