johnjordan

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • in reply to: ISIS flashing lights #400265
    johnjordan
    Participant

    Re: ISIS flashing lights

    Brilliant. I noticed that the door could still be opened even when I switched the machine on. I tried slamming the door as hard as possible then I took the top off the machine and wiggled the lock about. The machine started!!!

    Thankyou, thank you, thank you.

    in reply to: ISIS flashing lights #400262
    johnjordan
    Participant

    Re: ISIS flashing lights

    I should mention that I have cleaned the filter, checked the pump, checked the belt, cleaned out the hoses and checked the motor brushes. When the machine is first switched on the first light stays lit for a minute or two then a click is heard followed quickly by another click from the control knob then the lights start flashing.
    I have also left the machine switched off overnight to see if it would reset itself.

Viewing 2 posts - 1 through 2 (of 2 total)