[johnpaul]

Re: Hotpoint Aquarius WD440 Washer/Dryer

tbh go with hello_75’s option a lot less bother 8) and sence 😀

[johnpaul]

Re: Hotpoint Aquarius WD440 Washer/Dryer

3 and 4 is ntc fault F03.is w/m heating ❓ .check heater. un plug first 💡

[johnpaul]

Re: hotpoint wf100

tryed another pcb works a treet thanks again

[johnpaul]

Re: hotpoint wf100

hi hello_75, thanks for that used them in the past will give them a call monday.cheers 8)

[johnpaul]

Re: hotpoint wf100

i thought so. thanks just wanted to be sure before i orderd them or send it away for repair

[johnpaul]

Re: Whirlpool AWM 6100/1 Clicking

have you tryed unblocking the pump ❓

[johnpaul]

helo_75 wrote:could be pressure switch.. when u cleaned the sump, did u stick your fingers up the hole to make sure theres nothing there?

does it drain ok?, how does it look when u watch it empty?

dont seem to be a problem with the pump its pumping out no problem

[johnpaul]

Re: hotpoint wm73 still getting same error

the pump is ok after reading more posts on the site i will check the heater hopfully that will solve the problem.i think ive been down every other road…thanks for your help

[Author]

Posts