[Jon Baldwin]

Yeah i whizzed the sides off ant noticed there was water coming down from the top of the salt resevoir where it attaches to the tub. There is a black seal on the outside of the tub but just the collar on the inside of the tub. Im going to seal it up with a little silicone tonight and try it again. Fingers crossed thats the end of it

[Jon Baldwin]

Dave you absolute legend. The motor had a small bit of resistance and clicked. Now it moves. I tested the drain pump motor and free also. It’s currently finishing a 30 min rapid program and water is hot too. Made up thanks so much

spoke too soon. I got an e4 error at the end of the cycle.

[Jon Baldwin]

The water inlet up top was quite clogged up but there was loads of manky fish skin past the bottom filter when i used a plunger to try to force some flow. Thinking about it, could well be as you say a blocked motor. I assumed the same pump for the drain was for the recirculating water to the spray arms

[Jon Baldwin]

electrofix wrote:pump cant go the wrong way

small one does drain only you need to check the big one

Dave

Thanks again Dave, is it jsut a case of getting a hand in there and spinning it?

[Jon Baldwin]

Thanks Dave, is the motor quite a small one say the size of an R/C car? I still have the sides off it so can easily access it

Ah i can see its the larger unit at the bottom of the drain. Would that not be working since it pumps the waste water out? maybe its only pumping one way i guess

[Author]

Posts