jonesy12

Forum Replies Created

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • in reply to: Ikea Whirlpool DWF B10 fault #233943
    jonesy12
    Participant

    Re: Ikea Whirlpool DWF B10 fault

    It means you’ve forgotten to turn the water back on…

    Anyways, machine still not working…

    in reply to: Ikea Whirlpool DWF B10 fault #233942
    jonesy12
    Participant

    Re: Ikea Whirlpool DWF B10 fault

    The A10 green light is now flashing 6 times – what’s the diagnosis doc?

    in reply to: Ikea Whirlpool DWF B10 fault #233941
    jonesy12
    Participant

    Re: Ikea Whirlpool DWF B10 fault

    Quick question: whats the big vat of orange gunk next what looks like the salt container. Thanks!

    in reply to: Ikea Whirlpool DWF B10 fault #233940
    jonesy12
    Participant

    Re: Ikea Whirlpool DWF B10 fault

    Well I’ve opened up my A10 – looks very simple, and everything looks clean, clear and dry – does this confirm that the circulation pump has gone? Incidently, the conversation about the bosch got me looking at my ikea whirlpool guarantee – standard one lasted a year, but I looked again and found the marketing blurb for the 8 year extended one – I should have taken that out, only £25!

    in reply to: Ikea Whirlpool DWF B10 fault #233935
    jonesy12
    Participant

    Re: Ikea Whirlpool DWF B10 fault

    Okay, that gives me a little hope! I will sign off for this evening and have a play around tomorrow. Have a good evening, Jonesy12.

    in reply to: Ikea Whirlpool DWF B10 fault #233933
    jonesy12
    Participant

    Re: Ikea Whirlpool DWF B10 fault

    Rats; I was rather hoping you weren’t going to say that. Is it coincidence that an A10 and B10 give up the ghost after 2 years active service. Do I replace the dastardly device or do I go the whole hog and by a new one? Thanks, Jonesy12.

    in reply to: Ikea Whirlpool DWF B10 fault #233931
    jonesy12
    Participant

    Re: Ikea Whirlpool DWF B10 fault

    I have a 2 year old Ikea Whirlpool DWF A10 – it seems to be demonstrating the same fault as richard3009’s B10 and I’m keen to know what richard3009’s course of action was after his last posting.

    My symptoms are:
    Turn machine on and it makes a filling noise.
    The water comes in and fills the bottom of the dishwasher – crockery is dry/damp – it doesn’t seem the water is coming from the rotating arms.
    If left in the on position, it seems to be in a constant state of pause, heating the water at the bottom and not much else.
    I can pump the water out, by cancelling the programme and pressing the start button for a few seconds.

    The A10 model that we’ve had never has had any bleeping noises – also the green on light is either on or off.

    I don’t really have to dip into my back pocket to the sum of £200 which seems to be the going rate for the equivalent model at Ikea now. I’m lookinf forward to your replies and hope help is out there!

    Many thanks – Jonesy12

Viewing 7 posts - 1 through 7 (of 7 total)