jongriffin

Forum Replies Created

Viewing 15 posts - 16 through 30 (of 76 total)
1 2 3 4 5 6
  • Author
    Posts
  • September 13, 2014 at 7:28 am in reply to: samsung rsg5durs #419143
    jongriffin
    Participant

    Re: samsung rsg5durs

    no havent Bob have you any info on this and fault codes please?
    Jon

    September 12, 2014 at 3:41 pm in reply to: samsung rsg5durs #419141
    jongriffin
    Participant

    Re: samsung rsg5durs

    no not compressor as i said i can get it to go by pressing fast freeze and freezer temp together for ten seconds and it runs…

    June 13, 2014 at 2:18 pm in reply to: Beko CDA556 FW1 fridge too cold #415224
    jongriffin
    Participant

    Re: Beko CDA556 FW1 fridge too cold

    see no end of these Beko s***e always the sensor foamed in.
    Its rubbish that they havent come up with a way to replace or
    overcome this problem

    June 4, 2014 at 11:39 am in reply to: lg american f/f #414796
    jongriffin
    Participant

    Re: lg american f/f

    thanks Bryan thats a spot on idea.

    February 4, 2014 at 12:50 pm in reply to: beko cda539fw-2 thermistor #408206
    jongriffin
    Participant

    Re: beko cda539fw-2 thermistor

    Think these sensors are for freezer section not the foamed in one in fridge.
    I have had a lot of these that ice up in fridge, after trying rear pcb,control pcb stat
    and check gas can only conclude its the foamed in sensor, which cant find anyone who supplies them

    November 21, 2013 at 5:19 pm in reply to: liebherr f/f #404757
    jongriffin
    Participant

    Re: liebherr f/f

    Update
    fridge evap sensor made beeping and flashing go but didnt start the machine up at all…
    does the sensor in freezer play up as well?

    November 19, 2013 at 2:02 pm in reply to: liebherr f/f #404755
    jongriffin
    Participant

    Re: liebherr f/f

    Thanks Eldar59 have you part number by any chance?

    September 16, 2013 at 9:33 am in reply to: Cda563fw-2 beko #393048
    jongriffin
    Participant

    Re: Cda563fw-2 beko

    Thanks for your help

    September 16, 2013 at 8:09 am in reply to: Cda563fw-2 beko #393046
    jongriffin
    Participant

    Re: Cda563fw-2 beko

    tbh cant see a sensor in freezer section either on diagram..have you part number please?

    September 16, 2013 at 7:52 am in reply to: Cda563fw-2 beko #393044
    jongriffin
    Participant

    Re: Cda563fw-2 beko

    so the sensor on freezer evap controls fridge temp…is that right?

    September 15, 2013 at 4:47 pm in reply to: Cda563fw-2 beko #393042
    jongriffin
    Participant

    Re: Cda563fw-2 beko

    did anyone ever let you know if there is a sensor that can be changed in fridge section…seeing a few with this problem.

    August 17, 2013 at 7:42 pm in reply to: samsung rs21 #399522
    jongriffin
    Participant

    Re: samsung rs21

    fridge defrost heater was changed along with sensor and thermal cutout…maybe faulty heater?

    June 17, 2013 at 8:03 pm in reply to: Daewoo FRS-U20DCB fRIDGE/FREEZER #396347
    jongriffin
    Participant

    Re: Daewoo FRS-U20DCB fRIDGE/FREEZER

    So you cant change the air sensor just the pcb?
    Have also seen a few of these machines that lose all the gas….any idea where

    June 15, 2013 at 8:26 am in reply to: Daewoo FRS-U20DCB fRIDGE/FREEZER #396345
    jongriffin
    Participant

    Re: Daewoo FRS-U20DCB fRIDGE/FREEZER

    Hi Bob

    its the condenser fan…have changed pcb also now and it still wont come on…the evap fan is fine
    Where is the air sensor?

    Jon

    October 26, 2012 at 7:58 am in reply to: lg ice machine #383649
    jongriffin
    Participant

    Re: lg ice machine

    the test button inside at the back of machine.pressing that has no effect

  • Author
    Posts
Viewing 15 posts - 16 through 30 (of 76 total)
1 2 3 4 5 6