[jonmac73]

Re: Bosch Avantixx ‘check water’ light (model SGS45A02GB)

Did try but had problems with my Paypal and wasn’t clear it would be delivered by the weekend.
Will definately look here first if I need anything else in the future though – and great forums.
Thanks – saved me call out & repair fee at least, and cost of replacement at worst.

[jonmac73]

Re: Bosch Avantixx ‘check water’ light (model SGS45A02GB)

UPDATE – Fixed on Saturday and 4-5 washes successfully since.

Checked the pump fins could turn OK – still some resistance but did turn OK.
Replaced the Impellor Jug – took ages to get the hoses off and back on mine and had to have side and bottom panels off.

(sorry bought from espares as in stock with n/day delivery)

Spare part – great service, next day delivery with accurate tracking. Exactly the same part as on original.
http://shop.ukwhitegoods.co.uk/424099-bosch-dishwasher-flow-meter

Thanks to all who responded.
Hopefully this helps someone else.

[jonmac73]

Re: Bosch Avantixx ‘check water’ light (model SGS45A02GB)

thanks chaps.
Had already order the impellor jug – will be delivered this afternoon – so will take apart and look at both tonight.
Will post back results.

[jonmac73]

Re: Bosch Avantixx ‘check water’ light (model SGS45A02GB)

Thanks Martin – do you think it’s the pump at the bottom still stuck / jammed ?
Or is it the same part we are talking about, the impellor jug ?

[jonmac73]

Re: Bosch Avantixx ‘check water’ light (model SGS45A02GB)

Thanks – found the model number on door – VERY feint. It is indeed a Bosch SGS45A02GB.

Will try taking top/sides apart and order part recommended above. Will report back on how it goes.
Thanks all so far.

[jonmac73]

Re: Bosch Avantixx ‘check water’ light (model SGS45A02GB)

hi, thanks for reply.
Just to be clear – it fills fine. It does not drain.
When put onto a cycle now for 20-30 seconds hear a clicking noise, which I presume is drain cycle not working (they drain before start of each program right ?) and check water light on.
Is the resistance on the impeller I can see under the filters normal then ?
Have seen ‘impeller jug’ reference on other sites.
How can I check my model – there is no number on door/door frame that I can see. I have googled for avantixx and the model quoted is the closest I can find & the online manual works for most things but seems to have extra buttons on front.
Is the part likely to fit OK still ? If so will order Tuesday – worth a try for £15.

Thanks in advance – Jon

[Author]

Posts