Forum Replies Created
-
Posts
-
I’m pleased to say that I received a message yesterday, confirming no further action to be taken.
So, common sense has prevailed.
jontyI can obtain a Campini 45 degree c cooling fan thermostat, and I feel that would be fine, unless someone disagrees.
It would simply cut in at 45 degress c, rather than 50…
jontyI’m still struggling to obtain the above part, and wonder where you might order the part from?
jontyDoes anyone know where the cooling fan thermostat could be obtained? Part Number/s: 082634160, SPIA49230, Or IVLA49230 (thanks Ken)
Britannia (who outsource their parts to Belling) and Connect haven’t come back to me yet, following my requests for the above yesterday, although the parts person at Britannia/Belling thought that it would be obsolete!
jontyWell, I’ve identified the cause of the cooling fan not running…
I revisted today, and traced the wiring from the cooling fan; one goes to the selector switch, and the other to the TOC/Switch… located conveniently, near the right hand oven selector switch.
The wiring is fine, yet the above switch has failed.
However, Connect have informed me that the above is obsolete, which I’m sure is not the case! (I’ve requested a part number from Connect)
The TOC is a Campini Ty60 10/250 16/250 T210 43-12 50 degree C so, I await Connects’ feedback…
Thanks again, particularly Ken!jonty
p.s. Do you know if the main switch activates the cooling fan as soon as a heating function is selected?
Thanks again Ken,
I’ll return and follow the related wiring, and check the main oven function selector switch, which appears to be the likely cause of the above.
The other numbers from the ratings plate are: Serial No: 13040084, PTW11OFMP/N, & Part No: 1312AR1302
jontyGood evening all,
Ken, you are quite right; I fitted a new TOC to the above oven this afternoon, and then tested the oven operation thoroughly, and the cooling fan is not working.
I can confirm that the cooling fan is not receiving any voltage, and wonder if anyone has access to a wiring diagram for this oven?
The two wires to the cooling fan run into a harness, which appears fine, although I didn’t have enough time to determine where the cooling fan receives its power from, and suspect another possible TOC fault in the system.
Thanks in advance for any help,jonty
Thanks for your reply Ken,
Yes, the ventilation for the appliance is good.
I’ll recheck the oven thermostat, and assess the cooling fan operation.
Best wishes,Jon
Mmm, I wonder…
The base may well have been distorted by the joiner/fitter, when the dishwasher was installed around five years ago…(as mentioned a poor installation, with blocks of wood placed underneath the rear levelling foot.)
Hence, I suspected the anti-flood mechanism/microswitch, which tested fine. (and clicks perfectly on and off when manually raised and lowered.)
So, I remain a little flustered, as the base and float appear to be fine!
Thanks for your help with the above, (and several other problems) throughout the year Dave.
Merry Christmas,Jon
Yes, I agree that dishwasher is a Hotpoint/Whirlpool unit, and wonder why obtaining information is so difficult?
jonty
