JRG

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • in reply to: Ariston Margherita CD12T #188803
    JRG
    Participant

    Re: Ariston Margherita CD12T

    Dear Penguin 45,

    Got it!

    When I re-installed machine in its new position yesterday, I coupled hose to different, previously unused connection on sink drain. Due to lack of use this was choked by five-year sludge build-up.

    Machine working fine again. Thank you kindly for your help.

    Regards

    JRG

    in reply to: Ariston Margherita CD12T #188802
    JRG
    Participant

    Re: Ariston Margherita CD12T – No drain, no spin

    Dear Penguin 45,

    Thanks for the suggestions. Forgot to mention that drain hose is definitely clear and not crushed because I installed machine myself as part of kitchen rebuild.

    You mention “filter`”. Just to be sure, is there another filter in addition to the thingy accessible from the front panel (I called it naff trap)?

    After sleepless night have come to the conclusion that since machine spun nicely after I drained it manually, the fault will likely be pump failure or blockage within pump. Will now check if pump is spinning when machine in drain mode. But just in case I need a new pump and can’t lift part number from existing one, do you have it?

    Thank you.

    JRG

Viewing 2 posts - 1 through 2 (of 2 total)