[jrterror]

Re: Zanussi. scraping noise and sticking drum

Do doing this leave much room to find things possibly stuck and scraping, or just it just give access to one point under the drum? And i guess you still can’t replace the bearings by this or any other method?

[jrterror]

Re: Zanussi. scraping noise and sticking drum

Yes as suspected, a sealed drum. I actually saw that pic earlier, which is why I decided to post my questions on this site. You have both been very helpful, thank you. So, just to confim, there is no way to remove any possible items between the two drums? Not that I can see owt, had a very good look through the holes on the inner drum.
Once again ta

[jrterror]

Re: Zanussi. scraping noise and sticking drum

Just to confirm that is the PNC Number. found out now

[jrterror]

Re: Zanussi. scraping noise and sticking drum

Sticky label on back reads 914521109 Zanussi Electrolux ZWF1432S. Not sure if that is it.

[jrterror]

Re: Zanussi. scraping noise and sticking drum

Your a good man. Many Thanks for replying to my two messages. So, does that mean that there is not chance of getting to anything stuck in the drumor getting to the bearing, cos its a sealed drum?

[Author]

Posts