[keats]

Re: Diplomat ADP8242 power button does not function

Greg,

Thanks for your help I wasn’t sure if the card should have had 240 volts
input. How expensive are these cards.

Thanks

Jim

[keats]

Re: Diplomat ADP8242 power button does not function

I managed to get a hold of a meter and checked the voltage at the
power on button, it was reading under 200 volts ac at input when button
was out and no voltage at output end going to control card, when I pushed button
in both input and output read 240 volts ac but no leds come on in control card.
Should the 240 supply be rectified before it gets to the power on switch or are these
voltages correct, if so I suspect the control card is faulty, any help is appreciated.

Thanks

Keats

[keats]

Re: Diplomat ADP8242 power button does not function

I checked the fuse, switch and breakers all are fine, is there any
checks I could do before contacting an engineer.

Thanks

Jim

[Author]

Posts