[keeno]

Re: Smeg DWI612C beeping

How do I drain the system without power?? is there a valve i can release? I don’t want to plug this in again but the repair man may be a few days and I don’t want it to start smelling.

Thanks,

[keeno]

Re: Smeg DWI612C beeping

The smoke and smell of electrical burning tells me that this not just my machine getting confused! Guess it’s time to call a repair man or buy a new machine.

Thanks for your help.

[keeno]

Re: Smeg DWI612C beeping

Many thanks for this. I tried the method described and got light four solid and five flashing I couldn’t get the system to exit this mode no matter how many times if tried the proceedure.

I tried reset proc again.

turned on machine + pressed prgramme button 4 times

I got 1 solid 5 flashing

function key would not remove either lights. All i could do was close the door.

The system ran through a cycle but finshed with a single beep. and the light combination – 2 and 3 solid 5 flashing the system not drained

Closed the door but nothing – pressed prog and got the light combination 4 solid 5 flashing

closed the door

continued for a minute or so stopped with out draining with light combination – 1 and 4 solid 5 flashing – constant beeping

pressed the button again and closed the door

System drained finishing with all lights flashing

The system seems to be heating correctly and draining correctly but seems to be stopping at each stage of the cycle???

It there anything I can try other than the above?

Thanks

[Author]

Posts