Forum Replies Created
-
Posts
-
Re: Help please! – Smeg A2 Switching Problems
>> But, as I said, I’ve no clue what you’ve ordered so I’m not really able to comment as I’ve no idea if it’s right or wrong.
That’s understood and your advice is appreciated. I will send the switch I have back as I’m almost certain it isn’t right. I have seen the conversion document but I never installed the switch since it was so obviously not the same switching pattern (even with the conversion). My concern is just to be confident I’m buying the correct one this time.
Since the current switch also looks undamaged, I’m also slightly dubious that it is the cause of the issue. But if you think that’s the best place to start I will go ahead.
I had assumed that pdf from servevast was an original smeg diagram. Apologies if that’s incorrect – I wouldn’t want to tar this website with the same brush. Original part numbers make things so much easier!
Thanks again,
AlexRe: Help please! – Smeg A2 Switching Problems
Can you see the ID plate here? https://imgur.com/a/vjuP1 If not I’ll stick it in an email.
Model A2 Type 2DA
None of the websites seem to show original part numbers. The ukwhitegoods link for example doesn’t match the p/n from here: https://www.servevastdirect.co.uk/custo … ics/A2.pdf
I think it’s a conspiracy!
Re: Help please! – Smeg A2 Switching Problems
Thanks for taking a look!
I’m quite confused about which version I need. Do you know how to tell? This is the ID plate on the oven: https://imgur.com/a/vjuP1 which says it is an A2 – 2DA. The switch I bought is this one: https://www.espares.co.uk/product/es159 … tor-switch but the pin combinations were very different.
Many thanks again for your help!
