[knoxy]

Re: Ariston Margherita AWD10 Wont start

Hi all, i have looked all over the net to find out where these caron brushes are on my machine, can find loads of videos on how to remove the actual brushes but nothing to tell me where there are on the machine and how to them, can anyone help?
ps as i said before the page on this site for the brushes does not work.

[knoxy]

Re: Ariston Margherita AWD10 Wont start

Aaarrrhhh, did a search for these brushes on here and the link is dead or missing or so the page tell me, error 404 so i will search the web and see what i come up with but will keep checking to see if the link has been sorted out,

[knoxy]

Re: Ariston Margherita AWD10 Wont start

Allsorts, your right in hindsight it wasnt a very bright thing to do was it!! i left washer unpluged all night and just reconected it back up and no joy still the same.
Gandh1, after connecting it back up i shut the door quite firmly but no joy either.
Iadom, will check out these carbon brushes you speak of, will look on this site to find out how, but can i ask is it the same for all ariston margheritas, as in how i can get access to them???

[knoxy]

Re: Ariston Margherita AWD10 Wont start

Hi, thanks for the reply. Following other advice from another site i currently have the top and back off and have pulled out the connectors from that block which is on the left hand side of the washer at the bottom, was told to remove these and plug the machine back in (done) and i should see and led light which i dont, then un plag, put all the connectors back in and it should work. So i am off to work very soon but will put everything back together and shut the door hard, water pipes and waste pipe outt i should say that when i do select a cycle the door does lock or at least it wont open and is not loose at all, but will try when i have done my ten hrs of work!

[Author]

Posts