[krunchynutt]

Re: Indesit Dishwasher

Thanks again for the information.

Just to give any further clues, this morning I plugged the machine back in a couple of hours of being left in the reset position it came up with the A03 fault.

I then switched from reset to a program to get the same as before. The A03 dissapeared and I was left with a flashing drying sign again. Back in reset was just as before.

Upon testing the thermistor I get a dead short of zero ohms. Testing the heater gives me about 30 ohms.

Am now gettting A03 fault every time I reset and put back into a program. Also get one beep before the machine Flags A03.

Thanks

Mark

[krunchynutt]

Re: Indesit Dishwasher

Thanks for the quick reply even though the news is a little grim.

Mark

[krunchynutt]

Re: Indesit DE73

Hi.

Upon examining the machine again I have found out when I put the machine into a new program, Instead of running the machine shows the drying symbol in the display and also the flashing icon mentioned in the first post. The machine does not show any fault codes such as “A01, A02”

Thanks

Mark

[Author]

Posts